|
|
Conceptual design of air- mobil
Podhorský, Matěj ; Zikmund, Pavel (referee) ; Píštěk, Antonín (advisor)
The topic of the thesis is a conceptual design of a roadable aircraft. The comparison of existing concepts is made, as well as description of proposed solution, aircraft mass analysis, basic aerostatic calculations, flight and gust envelope calculation and a design of truss construction of the fuselage. The CS-VLA, alternatively ELSA-K, has been used as a certification base. The compliance to this certification specification is one of the goals of this thesis.
|
|
|
Haptic Feedback System and its Reliability
Horpatzká, Michaela ; Hlinka, Jiří (referee) ; Janhuba, Luboš (advisor)
This master thesis covers conceptual design of haptic feedback system and safety and reliability assessment. System is developed for aircraft categories UL2, EASA CS-LSA, EASA CS-VLA and EASA-CS-23. Conceptual design is divided into three parts. First is aimed on haptic system test with simulator. Second is conceptual design of haptic system for in-flight test. Third part contains safety and reliability assessment and summarizes problems of haptic system installation in real aircraft.
|
|
|
Design of single seat aiirplane by the UL - 2 regulation
Kövér, Ondřej ; Schoř, Pavel (referee) ; Píštěk, Antonín (advisor)
Bachelor´s thesis solves conceptual design of oneseater aircraft by the UL-2 regulations, that is up to 300 kilograms of take-off weight. In the first part of the thesis, there is survey of similar aircrafts and summary of their important characteristics. In further section are possible conceptions and the best choice of them outlined. Afterwards are characteristics of carrier surfaces, load calculation and flight envelope mentioned. The last part deals with calculation and design of engine mounting.
|
|
|
Urban three-wheeled vehicle with electric drive
Černík, Adam ; Porteš, Petr (referee) ; Tobiáš, Martin (advisor)
This bachelor thesis deals with the conceptual design of the chassis of a three-wheeled. The total payload od the vehicle is 160 kg. At the beginning, the work deals with the search for different types of chassis in used three-wheeled vehicles. The advantages and disadvantages of various chassis concepts and the subsequent choice of one them are also summarized. Then the conceptual parameters of the vehicle are selected. At the end a 3D model is modelled in program Inventor, which corresponds to the selected conceptual parameters. This model is used to visualize the designed chassis of three-wheeled vehicle.
|
|
|
Conceptual design of high performance glider with electric propulsion (in complience with EASA CS-22)
Hlůšek, Josef ; Sklenář, Filip (referee) ; Hlinka, Jiří (advisor)
This master's thesis is focused on conceptual design of glider with electric propulsion system following the CS-22 regulation. Statistical analysis of the glider with an auxiliary electric engine has been carried out in order to determine basic design parameters for conceptual design. Based on analytical drag polar, the flight performance parameters are calculated, in particular flight range and influence of the solar panels on the flight range. This thesis also includes preliminary design solution of accumulator placement within the wing.
|
|
|
Conceptual design of an upper wing aircraft using structures parts of the previous type
Koudelka, Jaroslav ; Katrňák, Tomáš (referee) ; Jebáček, Ivo (advisor)
The aim of this diploma thesis is to design a new high-wing aircraft for the company TL ultralight using the structural elements from another models from their portfolio. The design is created with an emphasis on crew comfort and cabin ergonomics. The first part of the thesis focuses on the description of the basic requirements for the aircraft and its classification in aviation regulations. It also contains a research part of competing types and currently produced type, which the proposed aircraft should replace in the company's portfolio. Then follows the characteristics of the individual parts of the airframe, the specification of the parts, which will be used from another types from portfolio, and parts which will be completely designed. Great emphasis is placed on the layout of the interior and its design and ergonomic. The proposed aircraft then demonstrates theoretical calculations of basic performances and a preliminary mass analysis. In the end, the benefits of the newly designed aircraft are evaluated with respect to the competing types.
|
|
|
Conceptual design of competition model airplane
Pospíšil, Jakub ; Vaněk, František (referee) ; Hájek, Tomáš (advisor)
This bachelor thesis deals with the conceptual design of a competition model of an aircraft for an international student competition. The introduction deals with the rules of the competition and their subsequent analysis. The research part deals with a possible concept of the aircraft from the point of view of various configurations of individual parts of the model. In the practical part, the characteristics of individual parts of the aircraft are processed and a mass analysis is performed.
|
|
|
Design of gear coupling
Kundýsek, Michal ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
The content of the diploma thesis is the construction of a toothed coupling for general use. The coupling was first described in order to acquaint the reader with the issue of the coupling. After approaching the issue, a practical part was created, which dealt with the conceptual design of the gear coupling. Two gear coupling designs have been developed to take into account as many customer requirements as possible. After making the model, strength calculations were created to verify the functionality of the coupling. The calculations mainly concerned important components for the operation of the clutch.
|
|
|
Conceptual design of small aircraft with emphasis on structure simplicity
Rajnštajn, David ; Horák, Marek (referee) ; Jebáček, Ivo (advisor)
This thesis relates to a conceptual design of a light aircraft considering its easy manufacturability in non-professional workshop, for example at home. It is divided into three main parts. At the beginning there is mentioned a summary of existing light airplanes which determines the conceptual frame of the designed aircraft. The next part describes more detailed draft of different functional units, taking into consideration the constructional and manufacturing issues. The final part then contains basic equations to verify and define the most important characteristics of the designed aircraft.
|
|
|
Design of a aircraft for towing and basic acrobtics
Loutocký, Jiří ; Šošovička, Róbert (referee) ; Mališ, Michal (advisor)
This master thesis solves conceptual design of aerotow airplane and airplane for basic aerobatics. Airplane is designed by using of specification CS-23. The first part of the thesis solves conceptual design. Especially possible concepts and choice the best one according to requests. Next part deals with flight performance of aerotow airplane in normal flight and also in aerobatics. The third part is engaged in main flight performance in aerotow. 3D system model of whole aircraft and compact disk with mentioned 3D model and electronic version of thesis is also added.
|
guest ::
